Application of cemented carbide flat bars strip for Jaw Crusher
Carbide Tips VSI stone
1.Suitable for crushing limestone, sandstone, sandy shale, lean
rock, silicified sandstone, copper pyrite etc.
2.Suitable for crushing hard sandstone, quartzite, dense silicified
dolomite, silicified quartzite, iron ore, diorite, granite, etc.
3.Suitable for mineral metamorphic sandstone, flower just porphyry,
granite, ordinary limestone, open granite, dolomite, magnetite etc.
4.Suitable for crushing middle-hard and highest-hard granite,
amphibolite, siliceous slate, copper pyrite, marble, sandstone,
basalt, etc
Description:
- HIP sintering, wear resistance,good impact resistance,high bending
strength,high bonding strength.
- Widely used for motors,electronic progressive dies and punches’s
blank material
- Often used for machining refractory alloy,hard wood,aluminum
section bar,brass rod and cast iron.
- OEM and ODM services are ok for us.
| Properties and applications of carbide strips |
| Grade | Density | T.R.S
MPa | Hardness HRA | Performance & application recommended |
| YM6 | 14.9 | 2400 | 90.5 | Good wear resistance, used for hard wood, used for processing original wood, aluminum section bar, brass rod and cast
iron. |
| YM6A | 14.85 | 2000 | 92.5 | Wear resistance higher than YM6, used for processing hard wood, original wood, aluminum section bar, brass rod and cast iron. |
| YM8 | 14.7 | 2800 | 89.8 | High wear and impact resistance , suitable for machining dry wood,
soft wood and non-ferrous metal section bar. |
| YM2T | 14.25 | 2400 | 92 | Fine grain alloy, with high wear resistance, bending strength,
bonding resistance and thermal strength. It is suitable for
machining refractory alloys, stainless steel, high manganese steel,
etc. |
| YS25 | 13.0 | 2200 | 91 | Wear resistance and strength comparatively higher, suitable for
machining cast iron, non-ferrous metal and non-metal materials. |
| YM25 | 14.45 | 3000 | 91.8 | Wear resistance and strength comparatively higher, suitable for processing cast iron, non-ferrous,metal and
non-metallid materials. |
| Other grades of strips may be offered according to customers'
requirement. |
| Properties and applications of carbide for strips |
| Grade | Density | T.R.S
MPa | Hardness HRA | Performance & application recommended |
| YM6 | 14.9 | 2150 | 90 | Good wear resistance, used for hard wood, used for processing original wood, aluminum section bar, brass rod and cast
iron. |
| YM6A | 14.9 | 1860 | 92 | Has wear resistance higher than YG6, used for processing hard wood, original wood, aluminum section bar, brass rod and cast iron. |
| YM8 | 14.7 | 2320 | 89.5 | Wear and percussion resistance , used for processing hard wood, soft wood, ferrous and non-ferrous. |
| YM2T | 14.5 | 2350 | 92 | Fine carbide, High wear resistance, high bending strength, high
resistance to bonding, high thermal strength. Machining of refractory alloys, stainless
steel and high manganese steel, etc. |
| YM25 | 14.5 | 2150 | 92.2 | Wear resistance and strength comparatively higher, suitable for processing cast iron, non-ferrous,metal and
non-metallid materials. |
| Other grades of strips may be offered according to customers'
requirement. |
Products packing:
We prefer inner package to ensure the products won’t get hurt
between each.
Firstly packed in small box fixed with cotton or foam.Then packed
in a big carton or use wood carton box if it needed.Or packed as
clients requests.
Basic company profile:
Zhuzhou Mingri Cemented Carbide Co.,Ltd Locate in Liyu industrial
area,Zhuzhou city,Hunan province,China,owns an area of over 30000
sm,we have up-to-date production lines,advanced facilities,a staff
of over 130 professional and technical staff.We also have been
awarded of ISO9001:2008 and ISO14001:2004 certificates.
What kind of products can we provide ?
Our main products including tungsten carbide dies for screws and
nuts,TBM cutter bits,percussion bits,tungsten carbide
plates,strips,rods,saw tips,buttons,sealing rings and etc.We have
customers throughout China,Europe,America,Austrilia,Japan,Taiwan
and Southeast Asia.
What’s your advantages ?
Advanced production line ensure all our customer’s demands,over 50
tons production capacity,strictly quality control,keep strictly of
bulk delivery date,with which,we can gained a very good reputation
in Tungsten carbide industry !
We are looking forward to cooperate with you.
We are not only produce tungsten carbide strips,plates,but also
tungsten carbide blade,dies,saw tips,hammer drill bits and so on.
Feel free to contact me if any needs:
Whatsapp/wechat/phone:008618593402651
Facebook:Xiao Aimee
zhuzhou mingri cemented carbide co. ltd
Email:mr009@mrcarbide.com
