YG22C Tungsten Carbide Die sintered blank , Cold Forging Die
ISO14001 2004
Description:
YM11 Forming or stamping dies for metal powders and nonmetal
powders.
1.Cemented carbide pellets are widely used in cold heading dies and
punching dies
for manufacturing nuts, bolts and many other products.
2.The grade GT55/YG25C is the most widely used material in making
carbide pellets.
It has excellent properties which lead to good performance and long
service time.
3.Except for the standard sizes, nonstandard sizes of carbide
pellets
can also be produced according to customer's requirements.
4.All carbide pellets inspected strictly with ultrasonic flaw
detector
to avoid ones with blowholes or cracks leaving the factory.
Grade:
| Grade | Density
g/cm3 | T.R.S
MPα | Hardness
HRA | Properties & Applications | Approx Grades in China |
| A | 13.5 | 3000 | 83.5 | Good wear resistance and bending strength. It is often preferrd by
nut forming dies and high impact-resistant dies. | — |
| YM11 | 14.4 | 2420 | 88.5 | Forming or stamping dies for metal powders and nonmetal powders. | YG11 |
| YM15 | 14.0 | 2500 | 87.5 | It is suitable for drawing steel tubes and rods under high
compression ratio, manufactuing upsetting, punching and forging
tools under large stress. | YG15 |
| YM20 | 13.5 | 2800 | 85.5 | It is suitable for manufacturing punching dies for watch parts,
leaf spring of musical instruments, battery jars, small sized steel
balls, screws, screw caps, etc. | YG20 |
| ML32 | 13.9 | 2750 | 85.5 | It is suitable for impact-resistant forging dies. | YG16C |
| ML36 | 13.7 | 2800 | 84.5 | It is suitable for impact-resistant forging dies, hot-forging dies
and finishing rollers. | YG18C |
| ML40 | 13.5 | 2850 | 83.5 | It is suitable for wear resistant or impact resistant dies. | YG20C ZL40.2 |
| ML50 | 13.3 | 2900 | 83.0 | It is suitable for nut forming dies and high impact-resistant
dies. | YG22C ZL40.5 |
| ML60 | 13.1 | 2950 | 82.5 | It is suitable for stainless screw dies and semifinishing rollers. | YG25C ZL40B |
| ML80 | 13.1 | 3050 | 83.4 | It is suitable for screw cap forming dies with high strength (
highest impact-resistant forging dies). | YG25C GT55 |
| Other grades of cemented carbide blanks for cold-forging dies may
be offered by customers' requirements |
Specifications:
Including but not limited to the following types.
Type
|
Dinension
|
Appllcable
| |
|
d | D | L
Range of L | |
BDP00710- | 0.7 | 10 | 12.0-20.0 | M1 | |
BDP01010- | 1.0 | 10 | 12.0-20.0 | M1.5-M2 | |
BDP01013- | 1.0 | 13 | 15.0-40.0 | M1.5-M2 | |
BDP01213- | 1.2 | 13 | 15.0-40.0 | M1.5-M2 | |
BDP01510- | 1.5 | 10 | 12.0-25.0 | M2 | |
BDP01516- | 1.5 | 16 | 15.0-45.0 | M2 | |
BDP01813- | 1.8 | 13 | 12.0-45.0 | M2.5 | |
BDP01816- | 1.8 | 16 | 20.0-45.0 | M2.5 | |
BDP02113- | 2.1 | 13 | 15.0-30.0 | M3 | |
BDP02116- | 2.1 | 16 | 25.0-45.0 | M3 | |
BDP02316- | 2.3 | 16 | 15.0-45.0 | M3 | |
BDP02522- | 2.5 | 22 | 20.0-60.0 | M3 | |
BDP02813- | 2.8 | 13 | 15.0-30.0 | M4 | |
BDP02816- | 2.8 | 16 | 25.0-40.0 | M4 | |
BDP02818- | 2.8 | 18 | 20.0-50.0 | M4 | |
BDP02820- | 2.8 | 20 | 20.0-50.0 | M4 | |
BDP02822- | 2.8 | 22 | 20.0-60.0 | M4 | |
BDP02825- | 2.8 | 25 | 20.0-60.0 | M4 | |
BDP03216- | 3.2 | 16 | 15.0-45.0 | M4 | |
BDP03218- | 3.2 | 18 | 15.0-50.0 | M4 | |
BDP03616- | 3.6 | 16 | 20.0-50.0 | M5 | |
BDP03618- | 3.6 | 18 | 20.0-60.0 | M5 | |
BDP03822- | 3.8 | 22 | 20.0-40.0 | M5 | |
BDP03830- | 3.8 | 30 | 50.0-60.0 | M5 | |
Applications:
Cemented carbide pellets are widely used in cold heading dies and
punching dies
for maufacturing nuts, screw caps, bolts, cans and many other
products.
